Mageia 4 alpha 3 + canon pixma MX395
-
- Δημοσιεύσεις: 2
- Εγγραφή: Τρί Οκτ 15, 2013 14:59 pm
Mageia 4 alpha 3 + canon pixma MX395
Καλησπέρα σε όλους.
Νέος στο φορουμ σας, ελπιζω και πιστευω να μου αρεσει και να τα λεμε συχνά.
Βασικά χρησιμοποιούσα ubuntu παραλληλα με τα xp για αρκετα χρονια, κλίνοντας περισσότερο προς το πρωτο. Καποια στιγμή μου χαλασε ενας εκτυπωτης hp που είχα και επειδή χρειάζομαι εκτυπωτη αγόρασα εναν canon το μοντελο που περιγραφω παραπανω. Παραλληλα αποφάσισα να εγκαταστησω την μαγεια, την οποια είχα χρησιμοποιησει στην 1η της εκδοση, στην mageia 1. Οποτε αν και ξερω οτι οι alpha εκδοσεις δεν ειναι σταθερες, κατεβασα την τελευταια εκδοοση και την εγκατεστησα. Το θεμα μου ειναι με τον εκτυπωτη, το λειτουργικο ρυθμισε τον εκτυπωτη, τον αναγνωρισε φυσικά αλλά δεν μπορω να εκτυπωσω!!! δεν υπαρχει θεμα συνδεσης με το laptop μου, ουτε θεμα να μην ειτουργει ο εκτυπωτης, διοτι τεσταρα διαφορες επιλογες ¨"συντηρησης" που ειχε και δουλεψε κανονικα. Και στο ubuntu 12.04.03 (τελευταιο update) που ειχα πάλι δεν λειτουργουσε. Oυσιαστικα μου λέει οτι ο "εκτυπωτης ειναι αδρανής"!!!! Δεν μπορω να καταλαβω τι γινεται (δεν εχω και καποια ιδιατερη σχεση με τους εκτυπωτες και τι προβληματα βγαζουν, οποτε ισως να ειναι και χαζη η ερωτηση μου).
Ευχαριστω εκ των προτερων για την απαντηση σας.
Υ.Γ.: Ελπίζω να εγραψα στο σωστο σημείο το ερωτημα μου. Καλο σας απόγευμα.
Νέος στο φορουμ σας, ελπιζω και πιστευω να μου αρεσει και να τα λεμε συχνά.
Βασικά χρησιμοποιούσα ubuntu παραλληλα με τα xp για αρκετα χρονια, κλίνοντας περισσότερο προς το πρωτο. Καποια στιγμή μου χαλασε ενας εκτυπωτης hp που είχα και επειδή χρειάζομαι εκτυπωτη αγόρασα εναν canon το μοντελο που περιγραφω παραπανω. Παραλληλα αποφάσισα να εγκαταστησω την μαγεια, την οποια είχα χρησιμοποιησει στην 1η της εκδοση, στην mageia 1. Οποτε αν και ξερω οτι οι alpha εκδοσεις δεν ειναι σταθερες, κατεβασα την τελευταια εκδοοση και την εγκατεστησα. Το θεμα μου ειναι με τον εκτυπωτη, το λειτουργικο ρυθμισε τον εκτυπωτη, τον αναγνωρισε φυσικά αλλά δεν μπορω να εκτυπωσω!!! δεν υπαρχει θεμα συνδεσης με το laptop μου, ουτε θεμα να μην ειτουργει ο εκτυπωτης, διοτι τεσταρα διαφορες επιλογες ¨"συντηρησης" που ειχε και δουλεψε κανονικα. Και στο ubuntu 12.04.03 (τελευταιο update) που ειχα πάλι δεν λειτουργουσε. Oυσιαστικα μου λέει οτι ο "εκτυπωτης ειναι αδρανής"!!!! Δεν μπορω να καταλαβω τι γινεται (δεν εχω και καποια ιδιατερη σχεση με τους εκτυπωτες και τι προβληματα βγαζουν, οποτε ισως να ειναι και χαζη η ερωτηση μου).
Ευχαριστω εκ των προτερων για την απαντηση σας.
Υ.Γ.: Ελπίζω να εγραψα στο σωστο σημείο το ερωτημα μου. Καλο σας απόγευμα.
- dglent
- Δημοσιεύσεις: 1069
- Εγγραφή: Τετ Ιουν 01, 2011 05:42 am
- Τοποθεσία: Γαλλία
- Has thanked: 6 φορές
Re: Mageia 4 alpha 3 + canon pixma MX395
Καλησπέρα, μπορείς να δεις σε πρώτη φάση αν με δεξι κλικ και ενεργοποίηση πάνω στον εκτυπωτή, από το κέντρο ελέγχου, ενεργοποιείται.
Δες επίσης τα αποτελέσματα της εντολής dmesg αμέσως μετά την σύνδεση του καλωδίου usb του εκτυπωτή
Δες επίσης τα αποτελέσματα της εντολής dmesg αμέσως μετά την σύνδεση του καλωδίου usb του εκτυπωτή
- dglent
- Δημοσιεύσεις: 1069
- Εγγραφή: Τετ Ιουν 01, 2011 05:42 am
- Τοποθεσία: Γαλλία
- Has thanked: 6 φορές
Re: Mageia 4 alpha 3 + canon pixma MX395
Εν τω μεταξύ drivers που βρίσκεις;
Απο εδώ:
http://www.canon.fr/Support/Consumer_Pr ... MX395.aspx
ή έχει στα αποθετήρια κάποιο πακέτο;
Απο εδώ:
http://www.canon.fr/Support/Consumer_Pr ... MX395.aspx
ή έχει στα αποθετήρια κάποιο πακέτο;
-
- Δημοσιεύσεις: 2
- Εγγραφή: Τρί Οκτ 15, 2013 14:59 pm
Re: Mageia 4 alpha 3 + canon pixma MX395
Συγνωμη που αργησα α απαντησω, καταρχην τους drivers τους εχω απο τα αποθετηρια της διανομης. Οσο αφορά αυτό που είπατε να ενεργοποιησω με δεξι κλικ απο το κεντρο ελεγχου, προσπαθω αλλα μου βγαζει σφαλμα οτι "το προγραμμα τερματιστηκε" και δεν μπαινει καν στην ρυθμιση του εκτυπωτη. Ισως να φταιει οτι ειναι και alpha εκδοση τι να πω. Σκεφτομαι να παω στην σταθερη εκδοση να ξενοιασω μου φαινεται. Το dmesg μου εμφανιζει ενα κατεβατο αυτο-->
[ 0.000000] node 0: [mem 0xdafff000-0xdaffffff]
[ 0.000000] node 0: [mem 0x100000000-0x11f5fffff]
[ 0.000000] On node 0 totalpages: 1012255
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13747 pages used for memmap
[ 0.000000] DMA32 zone: 879747 pages, LIFO batch:31
[ 0.000000] Normal zone: 2008 pages used for memmap
[ 0.000000] Normal zone: 128512 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc7505000-0xc7706fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd8085000-0xdaeeefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdaeef000-0xdaf9efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdaf9f000-0xdaffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdb000000-0xdf9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
[ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88011f200000 s84800 r8192 d21696 u262144
[ 0.000000] pcpu-alloc: s84800 r8192 d21696 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 996415
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.12.0-desktop-0.rc5.1.mga4 root=UUID=488e8e5a-1557-4507-a77b-9a59574e526e ro splash quiet resume=UUID=e2bfad7f-c41a-4d72-b9e3-1a71e012be4c
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3890548K/4049020K available (6282K kernel code, 870K rwdata, 3020K rodata, 1228K init, 912K bss, 158472K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
[ 0.000000] NR_IRQS:4352 nr_irqs:744 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.001000] tsc: Detected 2394.574 MHz processor
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4789.14 BogoMIPS (lpj=2394574)
[ 0.000004] pid_max: default: 32768 minimum: 301
[ 0.000022] Security Framework initialized
[ 0.000031] TOMOYO Linux initialized
[ 0.000297] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.001346] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.001810] Mount-cache hash table entries: 256
[ 0.001970] Initializing cgroup subsys devices
[ 0.001972] Initializing cgroup subsys freezer
[ 0.001974] Initializing cgroup subsys net_cls
[ 0.001975] Initializing cgroup subsys blkio
[ 0.001994] CPU: Physical Processor ID: 0
[ 0.001995] CPU: Processor Core ID: 0
[ 0.002000] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.002004] mce: CPU supports 7 MCE banks
[ 0.002015] CPU0: Thermal monitoring enabled (TM1)
[ 0.002022] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 1
[ 0.002156] Freeing SMP alternatives memory: 24K (ffffffff81e0e000 - ffffffff81e14000)
[ 0.003236] ACPI: Core revision 20130725
[ 0.008498] ACPI: All ACPI Tables successfully acquired
[ 0.008708] ftrace: allocating 23488 entries in 92 pages
[ 0.020439] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.030455] smpboot: CPU0: Intel(R) Core(TM) i3-3110M CPU @ 2.40GHz (fam: 06, model: 3a, stepping: 09)
[ 0.030462] TSC deadline timer enabled
[ 0.030470] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
[ 0.030476] ... version: 3
[ 0.030477] ... bit width: 48
[ 0.030478] ... generic registers: 4
[ 0.030479] ... value mask: 0000ffffffffffff
[ 0.030480] ... max period: 0000ffffffffffff
[ 0.030480] ... fixed-purpose events: 3
[ 0.030481] ... event mask: 000000070000000f
[ 0.031692] smpboot: Booting Node 0, Processors # 1 # 2 # 3 OK
[ 0.071462] Brought up 4 CPUs
[ 0.071465] smpboot: Total of 4 processors activated (19156.59 BogoMIPS)
[ 0.074716] devtmpfs: initialized
[ 0.077014] PM: Registering ACPI NVS region [mem 0xdaeef000-0xdaf9efff] (720896 bytes)
[ 0.077754] xor: automatically using best checksumming function:
[ 0.087528] avx : 16940.000 MB/sec
[ 0.087531] pinctrl core: initialized pinctrl subsystem
[ 0.087567] RTC time: 18:00:38, date: 10/16/13
[ 0.087598] NET: Registered protocol family 16
[ 0.087662] cpuidle: using governor ladder
[ 0.087664] cpuidle: using governor menu
[ 0.087689] ACPI: bus type PCI registered
[ 0.087691] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.087741] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.087743] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.093963] PCI: Using configuration type 1 for base access
[ 0.094077] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.094078] mtrr: probably your BIOS does not setup all CPUs.
[ 0.094078] mtrr: corrected configuration.
[ 0.094503] bio: create slab <bio-0> at 0
[ 0.111578] raid6: sse2x1 6574 MB/s
[ 0.128608] raid6: sse2x2 8125 MB/s
[ 0.145644] raid6: sse2x4 9437 MB/s
[ 0.145645] raid6: using algorithm sse2x4 (9437 MB/s)
[ 0.145647] raid6: using ssse3x2 recovery algorithm
[ 0.145689] ACPI: Added _OSI(Module Device)
[ 0.145690] ACPI: Added _OSI(Processor Device)
[ 0.145692] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.145693] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.146881] ACPI: EC: Look up EC in DSDT
[ 0.148019] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.162071] ACPI: SSDT 00000000dae8d018 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.162374] ACPI: Dynamic OEM Table Load:
[ 0.162376] ACPI: SSDT (null) 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.165921] ACPI: SSDT 00000000dae8ea98 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.166248] ACPI: Dynamic OEM Table Load:
[ 0.166249] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.168809] ACPI: SSDT 00000000daeedc18 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.169107] ACPI: Dynamic OEM Table Load:
[ 0.169108] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.172371] ACPI: Interpreter enabled
[ 0.172377] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571)
[ 0.172381] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
[ 0.172395] ACPI: (supports S0 S3 S4 S5)
[ 0.172396] ACPI: Using IOAPIC for interrupt routing
[ 0.172416] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.172535] ACPI: No dock devices found.
[ 0.178902] ACPI: Power Resource [QFAN] (off)
[ 0.179500] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.179559] \_SB_.PCI0:_OSC invalid revision
[ 0.179560] _OSC request data:1 8 0
[ 0.179614] \_SB_.PCI0:_OSC invalid revision
[ 0.179615] _OSC request data:1 1f 0
[ 0.179618] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.179620] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.180137] ACPI: \_SB_.PCI0.PDRC: can't evaluate _ADR (0x5)
[ 0.180219] PCI host bridge to bus 0000:00
[ 0.180222] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.180223] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.180225] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.180226] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.180228] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff]
[ 0.180235] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.180307] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.180318] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
[ 0.180324] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.180329] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
[ 0.180416] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.180440] pci 0000:00:14.0: reg 0x10: [mem 0xf0600000-0xf060ffff 64bit]
[ 0.180512] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.180548] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.180580] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.180603] pci 0000:00:16.0: reg 0x10: [mem 0xf0615000-0xf061500f 64bit]
[ 0.180680] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.180754] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.180777] pci 0000:00:1a.0: reg 0x10: [mem 0xf061a000-0xf061a3ff]
[ 0.180869] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.180919] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.180952] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.180968] pci 0000:00:1b.0: reg 0x10: [mem 0xf0610000-0xf0613fff 64bit]
[ 0.181038] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.181104] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.181185] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.181246] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 0.181326] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.181390] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[ 0.181470] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.181541] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.181562] pci 0000:00:1d.0: reg 0x10: [mem 0xf0619000-0xf06193ff]
[ 0.181653] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.181701] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.181730] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
[ 0.181895] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.181915] pci 0000:00:1f.2: reg 0x10: [io 0x3088-0x308f]
[ 0.181924] pci 0000:00:1f.2: reg 0x14: [io 0x3094-0x3097]
[ 0.181932] pci 0000:00:1f.2: reg 0x18: [io 0x3080-0x3087]
[ 0.181940] pci 0000:00:1f.2: reg 0x1c: [io 0x3090-0x3093]
[ 0.181949] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
[ 0.181956] pci 0000:00:1f.2: reg 0x24: [mem 0xf0618000-0xf06187ff]
[ 0.182003] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.182058] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.182075] pci 0000:00:1f.3: reg 0x10: [mem 0xf0614000-0xf06140ff 64bit]
[ 0.182096] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
[ 0.182222] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.182351] pci 0000:02:00.0: [8086:0887] type 00 class 0x028000
[ 0.182396] pci 0000:02:00.0: reg 0x10: [mem 0xf0500000-0xf0501fff 64bit]
[ 0.182621] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.183851] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.183858] pci 0000:00:1c.1: bridge window [mem 0xf0500000-0xf05fffff]
[ 0.183953] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 0.183973] pci 0000:03:00.0: reg 0x10: [io 0x2000-0x20ff]
[ 0.184009] pci 0000:03:00.0: reg 0x18: [mem 0xf0404000-0xf0404fff 64bit pref]
[ 0.184031] pci 0000:03:00.0: reg 0x20: [mem 0xf0400000-0xf0403fff 64bit pref]
[ 0.184126] pci 0000:03:00.0: supports D1 D2
[ 0.184127] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.184166] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.185808] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.185812] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.185821] pci 0000:00:1c.2: bridge window [mem 0xf0400000-0xf04fffff 64bit pref]
[ 0.186198] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.186247] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.186292] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[ 0.186338] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[ 0.186384] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.186431] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.186476] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.186522] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.186808] ACPI: Enabled 8 GPEs in block 00 to 3F
[ 0.186814] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.186858] Found 1 acpi root devices
[ 0.186884] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.186944] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.186946] vgaarb: loaded
[ 0.186947] vgaarb: bridge control possible 0000:00:02.0
[ 0.186993] SCSI subsystem initialized
[ 0.187032] libata version 3.00 loaded.
[ 0.187102] PCI: Using ACPI for IRQ routing
[ 0.188693] PCI: pci_cache_line_size set to 64 bytes
[ 0.188785] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
[ 0.188786] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[ 0.188788] e820: reserve RAM buffer [mem 0xc7505000-0xc7ffffff]
[ 0.188789] e820: reserve RAM buffer [mem 0xd8085000-0xdbffffff]
[ 0.188790] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff]
[ 0.188791] e820: reserve RAM buffer [mem 0x11f600000-0x11fffffff]
[ 0.188856] NetLabel: Initializing
[ 0.188858] NetLabel: domain hash size = 128
[ 0.188858] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.188867] NetLabel: unlabeled traffic allowed by default
[ 0.188892] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.188896] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.190927] Switched to clocksource hpet
[ 0.195477] pnp: PnP ACPI init
[ 0.195488] ACPI: bus type PNP registered
[ 0.195515] pnp 00:00: [dma 4]
[ 0.195532] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.195549] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.195626] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.195651] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.195689] system 00:04: [io 0x0680-0x069f] has been reserved
[ 0.195691] system 00:04: [io 0x1000-0x100f] has been reserved
[ 0.195693] system 00:04: [io 0xffff] has been reserved
[ 0.195694] system 00:04: [io 0xffff] has been reserved
[ 0.195697] system 00:04: [io 0x0400-0x0453] could not be reserved
[ 0.195698] system 00:04: [io 0x0458-0x047f] has been reserved
[ 0.195700] system 00:04: [io 0x0500-0x057f] has been reserved
[ 0.195701] system 00:04: [io 0x164e-0x164f] has been reserved
[ 0.195704] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.195725] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.195762] system 00:06: [io 0x0454-0x0457] has been reserved
[ 0.195764] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.195788] pnp 00:07: Plug and Play ACPI device, IDs FUJ0300 PNP0303 (active)
[ 0.195811] pnp 00:08: Plug and Play ACPI device, IDs ALP0403 PNP0f13 (active)
[ 0.195941] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.195943] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.195945] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.195947] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.195949] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.195950] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.195952] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.195953] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.195955] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.195957] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.195959] system 00:09: [mem 0xfffff000-0xffffffff] has been reserved
[ 0.195961] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.196173] pnp: PnP ACPI: found 10 devices
[ 0.196174] ACPI: bus type PNP unregistered
[ 0.202254] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.202268] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.202273] pci 0000:00:1c.1: bridge window [mem 0xf0500000-0xf05fffff]
[ 0.202281] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.202285] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.202292] pci 0000:00:1c.2: bridge window [mem 0xf0400000-0xf04fffff 64bit pref]
[ 0.202299] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.202301] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.202303] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.202304] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfeafffff]
[ 0.202306] pci_bus 0000:02: resource 1 [mem 0xf0500000-0xf05fffff]
[ 0.202308] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.202309] pci_bus 0000:03: resource 2 [mem 0xf0400000-0xf04fffff 64bit pref]
[ 0.202335] NET: Registered protocol family 2
[ 0.202466] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.202583] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.202665] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.202681] TCP: reno registered
[ 0.202688] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.202704] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.202756] NET: Registered protocol family 1
[ 0.202765] pci 0000:00:02.0: Boot video device
[ 0.203219] PCI: CLS 64 bytes, default 64
[ 0.203254] Trying to unpack rootfs image as initramfs...
[ 0.307326] Freeing initrd memory: 10248K (ffff880036bec000 - ffff8800375ee000)
[ 0.307330] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.307332] software IO TLB [mem 0xd4085000-0xd8085000] (64MB) mapped at [ffff8800d4085000-ffff8800d8084fff]
[ 0.307692] audit: initializing netlink socket (disabled)
[ 0.307701] type=2000 audit(1381946438.296:1): initialized
[ 0.330039] bounce pool size: 64 pages
[ 0.330059] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.330908] zbud: loaded
[ 0.331062] VFS: Disk quotas dquot_6.5.2
[ 0.331094] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.331433] bio: create slab <bio-1> at 1
[ 0.331544] Btrfs loaded
[ 0.331550] msgmni has been set to 7618
[ 0.331827] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.331856] io scheduler noop registered
[ 0.331857] io scheduler deadline registered
[ 0.331876] io scheduler cfq registered (default)
[ 0.332250] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.332260] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.332299] intel_idle: MWAIT substates: 0x21120
[ 0.332300] intel_idle: v0.4 model 0x3A
[ 0.332301] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.332401] GHES: HEST is not enabled!
[ 0.332437] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.332765] Linux agpgart interface v0.103
[ 0.333668] brd: module loaded
[ 0.333777] mei_me 0000:00:16.0: setting latency timer to 64
[ 0.333804] mei_me 0000:00:16.0: irq 40 for MSI/MSI-X
[ 0.336744] ahci 0000:00:1f.2: version 3.0
[ 0.336828] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[ 0.336853] ahci: SSS flag set, parallel bus scan disabled
[ 0.347118] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
[ 0.347122] ahci 0000:00:1f.2: flags: 64bit ncq stag led clo pio ems apst
[ 0.347126] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.349469] scsi0 : ahci
[ 0.349590] scsi1 : ahci
[ 0.349711] scsi2 : ahci
[ 0.349838] scsi3 : ahci
[ 0.349909] scsi4 : ahci
[ 0.349964] scsi5 : ahci
[ 0.349988] ata1: SATA max UDMA/133 abar m2048@0xf0618000 port 0xf0618100 irq 41
[ 0.349990] ata2: DUMMY
[ 0.349993] ata3: SATA max UDMA/133 abar m2048@0xf0618000 port 0xf0618200 irq 41
[ 0.349993] ata4: DUMMY
[ 0.349994] ata5: DUMMY
[ 0.349995] ata6: DUMMY
[ 0.350052] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.352305] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.352309] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.352395] mousedev: PS/2 mouse device common for all mice
[ 0.352490] rtc_cmos 00:05: RTC can wake from S4
[ 0.352620] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.352648] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.352656] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.352738] TCP: cubic registered
[ 0.352743] Key type dns_resolver registered
[ 0.352744] mpls_gso: MPLS GSO support
[ 0.352899] PM: Checking hibernation image partition UUID=e2bfad7f-c41a-4d72-b9e3-1a71e012be4c
[ 0.359456] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.655374] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.664935] ata1.00: ACPI cmd ef/90:03:00:00:00:a0 (SET FEATURES) succeeded
[ 0.664939] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 0.665574] ata1.00: ATA-8: ST500LT012-9WS142, 0001SDM1, max UDMA/133
[ 0.665578] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 0.706674] ata1.00: ACPI cmd ef/90:03:00:00:00:a0 (SET FEATURES) succeeded
[ 0.706677] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 0.707298] ata1.00: configured for UDMA/133
[ 0.707499] scsi 0:0:0:0: Direct-Access ATA ST500LT012-9WS14 0001 PQ: 0 ANSI: 5
[ 0.707664] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 0.707667] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 0.707819] sd 0:0:0:0: [sda] Write Protect is off
[ 0.707823] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.707859] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.731478] sda: sda1 sda2 < sda5 sda6 >
[ 0.732263] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.758871] psmouse serio1: alps: Unknown ALPS touchpad: E7=73 03 50, EC=73 02 02
[ 1.012678] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.014494] ata3.00: ATAPI: MATSHITADVD-RAM UJ8A2AS, 1.40, max UDMA/100
[ 1.016616] ata3.00: configured for UDMA/100
[ 1.018617] scsi 2:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8A2AS 1.40 PQ: 0 ANSI: 5
[ 1.309923] tsc: Refined TSC clocksource calibration: 2394.560 MHz
[ 1.515870] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input1
[ 1.518688] PM: Hibernation image not present or could not be loaded.
[ 1.518709] registered taskstats version 1
[ 1.519132] Magic number: 1:99:39
[ 1.519226] rtc_cmos 00:05: setting system clock to 2013-10-16 18:00:39 UTC (1381946439)
[ 1.519228] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.519229] EDD information not available.
[ 1.519947] Freeing unused kernel memory: 1228K (ffffffff81cdb000 - ffffffff81e0e000)
[ 1.519948] Write protecting the kernel read-only data: 12288k
[ 1.523811] Freeing unused kernel memory: 1900K (ffff880001625000 - ffff880001800000)
[ 1.525887] Freeing unused kernel memory: 1076K (ffff880001af3000 - ffff880001c00000)
[ 1.563994] dracut: dracut-034
[ 1.627745] systemd-udevd[192]: starting version 208
[ 1.666476] [drm] Initialized drm 1.1.0 20060810
[ 1.670949] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 1.670955] ACPI: Power Button [PWRB]
[ 1.671018] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[ 1.671285] ACPI: Lid Switch [LID0]
[ 1.671468] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 1.671473] ACPI: Power Button [PWRF]
[ 1.705538] [drm] Memory usable by graphics device = 2048M
[ 1.705545] i915 0000:00:02.0: setting latency timer to 64
[ 1.734415] i915 0000:00:02.0: irq 42 for MSI/MSI-X
[ 1.734425] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 1.734427] [drm] Driver supports precise vblank timestamp query.
[ 1.734479] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.770193] fbcon: inteldrmfb (fb0) is primary device
[ 2.310918] Switched to clocksource tsc
[ 2.513547] Console: switching to colour frame buffer device 170x48
[ 2.516062] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 2.516063] i915 0000:00:02.0: registered panic notifier
[ 2.524720] acpi device:3b: registered as cooling_device0
[ 2.524951] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.525009] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
[ 2.525054] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 2.527441] dracut: Starting plymouth daemon
[ 3.720279] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[ 3.732257] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.732262] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.732382] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 3.745803] ACPI: bus type USB registered
[ 3.745837] usbcore: registered new interface driver usbfs
[ 3.745849] usbcore: registered new interface driver hub
[ 3.745899] usbcore: registered new device driver usb
[ 3.752934] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.753663] ehci-pci: EHCI PCI platform driver
[ 3.753817] ehci-pci 0000:00:1a.0: setting latency timer to 64
[ 3.753829] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 3.753836] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 3.753853] ehci-pci 0000:00:1a.0: debug port 2
[ 3.757780] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 3.757999] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf061a000
[ 3.763982] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 3.764027] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.764029] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.764030] usb usb1: Product: EHCI Host Controller
[ 3.764032] usb usb1: Manufacturer: Linux 3.12.0-desktop-0.rc5.1.mga4 ehci_hcd
[ 3.764033] usb usb1: SerialNumber: 0000:00:1a.0
[ 3.764155] hub 1-0:1.0: USB hub found
[ 3.764163] hub 1-0:1.0: 3 ports detected
[ 3.764442] ehci-pci 0000:00:1d.0: setting latency timer to 64
[ 3.764450] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 3.764458] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 3.764474] ehci-pci 0000:00:1d.0: debug port 2
[ 3.768375] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 3.768395] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf0619000
[ 3.773988] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 3.774027] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.774029] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.774031] usb usb2: Product: EHCI Host Controller
[ 3.774032] usb usb2: Manufacturer: Linux 3.12.0-desktop-0.rc5.1.mga4 ehci_hcd
[ 3.774034] usb usb2: SerialNumber: 0000:00:1d.0
[ 3.774151] hub 2-0:1.0: USB hub found
[ 3.774161] hub 2-0:1.0: 3 ports detected
[ 3.774432] xhci_hcd 0000:00:14.0: setting latency timer to 64
[ 3.774438] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 3.774445] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 3.774555] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 3.774586] xhci_hcd 0000:00:14.0: irq 43 for MSI/MSI-X
[ 3.774966] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.774970] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.774972] usb usb3: Product: xHCI Host Controller
[ 3.774988] usb usb3: Manufacturer: Linux 3.12.0-desktop-0.rc5.1.mga4 xhci_hcd
[ 3.774990] usb usb3: SerialNumber: 0000:00:14.0
[ 3.775118] hub 3-0:1.0: USB hub found
[ 3.775132] hub 3-0:1.0: 4 ports detected
[ 3.775487] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 3.775492] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 3.775535] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 3.775537] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.775538] usb usb4: Product: xHCI Host Controller
[ 3.775539] usb usb4: Manufacturer: Linux 3.12.0-desktop-0.rc5.1.mga4 xhci_hcd
[ 3.775541] usb usb4: SerialNumber: 0000:00:14.0
[ 3.775617] hub 4-0:1.0: USB hub found
[ 3.775626] hub 4-0:1.0: 4 ports detected
[ 4.066340] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 4.180711] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 4.180714] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.180945] hub 1-1:1.0: USB hub found
[ 4.181049] hub 1-1:1.0: 6 ports detected
[ 4.284471] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 4.292610] PM: Marking nosave pages: [mem 0x0009d000-0x000fffff]
[ 4.292618] PM: Marking nosave pages: [mem 0x20000000-0x201fffff]
[ 4.292626] PM: Marking nosave pages: [mem 0x40004000-0x40004fff]
[ 4.292628] PM: Marking nosave pages: [mem 0xc7505000-0xc7706fff]
[ 4.292636] PM: Marking nosave pages: [mem 0xd8085000-0xdaffefff]
[ 4.292796] PM: Marking nosave pages: [mem 0xdb000000-0xffffffff]
[ 4.293338] PM: Basic memory bitmaps created
[ 4.308633] PM: Basic memory bitmaps freed
[ 4.308646] video LNXVIDEO:00: Restoring backlight state
[ 4.311047] PM: Starting manual resume from disk
[ 4.311051] PM: Hibernation image partition 8:5 present
[ 4.311052] PM: Looking for hibernation image.
[ 4.352407] PM: Image not found (code -22)
[ 4.352410] PM: Hibernation image not present or could not be loaded.
[ 4.398858] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 4.398861] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.399120] hub 2-1:1.0: USB hub found
[ 4.399207] hub 2-1:1.0: 6 ports detected
[ 4.415644] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 4.486788] dracut: Checking ext4: /dev/disk/by-uuid/488e8e5a-1557-4507-a77b-9a59574e526e
[ 4.486943] dracut: issuing e2fsck -a /dev/disk/by-uuid/488e8e5a-1557-4507-a77b-9a59574e526e
[ 4.530194] dracut: /dev/disk/by-uuid/488e8e5a-1557-4507-a77b-9a59574e526e: clean, 106102/788416 files, 1125760/3148484 blocks
[ 4.531581] dracut: Mounting /dev/disk/by-uuid/488e8e5a-1557-4507-a77b-9a59574e526e with -o acl,noatime,ro
[ 4.553721] usb 3-2: new low-speed USB device number 2 using xhci_hcd
[ 4.569391] usb 3-2: New USB device found, idVendor=15d9, idProduct=0a4c
[ 4.569395] usb 3-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 4.569397] usb 3-2: Product: USB OPTICAL MOUSE
[ 4.569554] usb 3-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 4.575313] hidraw: raw HID events driver (C) Jiri Kosina
[ 4.577315] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: acl
[ 4.579957] usbcore: registered new interface driver usbhid
[ 4.579959] usbhid: USB HID core driver
[ 4.580572] input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/input/input6
[ 4.580652] hid-generic 0003:15D9:0A4C.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:14.0-2/input0
[ 4.627441] dracut: Mounted root filesystem /dev/sda1
[ 4.722818] usb 3-3: new high-speed USB device number 3 using xhci_hcd
[ 4.736001] usb 3-3: New USB device found, idVendor=04a9, idProduct=1766
[ 4.736015] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.736017] usb 3-3: Product: MX390 series
[ 4.736018] usb 3-3: Manufacturer: Canon
[ 4.736020] usb 3-3: SerialNumber: 916CC2
[ 4.800139] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
[ 4.873303] dracut: Switching root
[ 4.874798] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[ 4.890645] usb 1-1.1: New USB device found, idVendor=8087, idProduct=07da
[ 4.890648] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.964063] usb 1-1.4: new high-speed USB device number 4 using ehci-pci
[ 5.139227] usb 1-1.4: New USB device found, idVendor=05c8, idProduct=0344
[ 5.139232] usb 1-1.4: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 5.139234] usb 1-1.4: Product: FJ Camera
[ 5.139235] usb 1-1.4: Manufacturer: Generic
[ 5.139237] usb 1-1.4: SerialNumber: 200901010001
[ 5.412450] systemd[1]: systemd 208 running in system mode. (+PAM +LIBWRAP +AUDIT -SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 5.602905] systemd[1]: Inserted module 'autofs4'
[ 5.686734] NET: Registered protocol family 10
[ 5.686935] systemd[1]: Inserted module 'ipv6'
[ 5.692464] systemd[1]: Set hostname to <localhost>.
[ 6.643525] systemd[1]: Starting Collect Read-Ahead Data...
[ 6.644717] systemd[1]: Starting Replay Read-Ahead Data...
[ 6.645878] systemd[1]: Starting Login Prompts.
[ 6.645941] systemd[1]: Reached target Login Prompts.
[ 6.645964] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 6.646022] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 6.646035] systemd[1]: Starting RPC Port Mapper.
[ 6.646077] systemd[1]: Reached target RPC Port Mapper.
[ 6.646093] systemd[1]: Starting Remote File Systems.
[ 6.646132] systemd[1]: Reached target Remote File Systems.
[ 6.646156] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 6.646218] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 6.646232] systemd[1]: Starting Delayed Shutdown Socket.
[ 6.646301] systemd[1]: Listening on Delayed Shutdown Socket.
[ 6.646322] systemd[1]: Starting Encrypted Volumes.
[ 6.646359] systemd[1]: Reached target Encrypted Volumes.
[ 6.646390] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 6.646533] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 6.646552] systemd[1]: Starting Journal Socket.
[ 6.646630] systemd[1]: Listening on Journal Socket.
[ 6.646643] systemd[1]: Starting Set default kernel console loglevel...
[ 6.662476] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 6.663585] systemd[1]: Mounting POSIX Message Queue File System...
[ 6.664717] systemd[1]: Mounting Debug File System...
[ 6.665855] systemd[1]: Mounting Huge Pages File System...
[ 6.667071] systemd[1]: Starting Journal Service...
[ 6.668317] systemd[1]: Started Journal Service.
[ 6.668537] systemd[1]: Expecting device dev-disk-by\x2duuid-e2bfad7f\x2dc41a\x2d4d72\x2db9e3\x2d1a71e012be4c.device...
[ 6.668562] systemd[1]: Starting Configure read-only root support...
[ 6.669719] systemd[1]: Starting udev Kernel Socket.
[ 6.669787] systemd[1]: Listening on udev Kernel Socket.
[ 6.669814] systemd[1]: Starting udev Control Socket.
[ 6.669858] systemd[1]: Listening on udev Control Socket.
[ 6.669876] systemd[1]: Starting udev Coldplug all Devices...
[ 6.671178] systemd[1]: Mounting Temporary Directory...
[ 6.671411] systemd-readahead[452]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day.
[ 7.003668] systemd-journald[458]: Vacuuming done, freed 0 bytes
[ 7.025060] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
[ 7.026186] systemd[1]: Started Import network configuration from initramfs.
[ 7.026217] systemd[1]: Starting Root Slice.
[ 7.026283] systemd[1]: Created slice Root Slice.
[ 7.026294] systemd[1]: Starting User and Session Slice.
[ 7.026397] systemd[1]: Created slice User and Session Slice.
[ 7.026415] systemd[1]: Starting System Slice.
[ 7.026446] systemd[1]: Created slice System Slice.
[ 7.026463] systemd[1]: Starting system-getty.slice.
[ 7.026556] systemd[1]: Created slice system-getty.slice.
[ 7.026570] systemd[1]: Starting Slices.
[ 7.026591] systemd[1]: Reached target Slices.
[ 7.026606] systemd[1]: Expecting device dev-disk-by\x2duuid-cf87db26\x2de4d8\x2d408c\x2dbe7b\x2d183bc8c16551.device...
[ 7.028522] systemd[1]: Started Collect Read-Ahead Data.
[ 7.028670] systemd[1]: Started Replay Read-Ahead Data.
[ 7.028907] systemd[1]: Started Set default kernel console loglevel.
[ 7.041040] systemd[1]: Starting Load legacy module configuration...
[ 7.042175] systemd[1]: Starting Setup Virtual Console...
[ 7.062876] systemd[1]: Starting Load Kernel Modules...
[ 7.065121] systemd[1]: Started Set Up Additional Binary Formats.
[ 7.065143] systemd[1]: Starting File System Check on Root Device...
[ 7.066501] systemd[1]: Starting Apply Kernel Variables...
[ 7.068243] systemd[1]: Started udev Coldplug all Devices.
[ 7.068363] systemd[1]: Starting udev Wait for Complete Device Initialization...
[ 7.125143] systemd[1]: Started Apply Kernel Variables.
[ 7.128725] systemd[1]: Started Setup Virtual Console.
[ 7.400905] systemd[1]: Mounted Temporary Directory.
[ 7.401254] systemd[1]: Mounted Huge Pages File System.
[ 7.401362] systemd[1]: Mounted Debug File System.
[ 7.401444] systemd[1]: Mounted POSIX Message Queue File System.
[ 7.401825] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 7.402029] systemd[1]: Started File System Check on Root Device.
[ 7.402123] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 7.403226] systemd[1]: Starting Create static device nodes in /dev...
[ 7.429663] systemd[1]: Started Create static device nodes in /dev.
[ 7.429777] systemd[1]: Starting udev Kernel Device Manager...
[ 7.432523] systemd-udevd[489]: starting version 208
[ 7.432601] systemd[1]: Started udev Kernel Device Manager.
[ 7.454465] systemd[1]: Started Load Kernel Modules.
[ 7.454598] systemd[1]: Mounted FUSE Control File System.
[ 7.454621] systemd[1]: Mounted Configuration File System.
[ 7.581189] EXT4-fs (sda1): re-mounted. Opts: acl
[ 7.581908] systemd[1]: Started Remount Root and Kernel File Systems.
[ 7.582034] systemd[1]: Starting Load/Save Random Seed...
[ 7.583189] systemd[1]: Starting Local File Systems (Pre).
[ 7.583242] systemd[1]: Reached target Local File Systems (Pre).
[ 7.584410] systemd[1]: Started Load/Save Random Seed.
[ 7.769201] systemd[1]: Started Configure read-only root support.
[ 7.819771] systemd[1]: Started udev Wait for Complete Device Initialization.
[ 7.819887] systemd[1]: Starting Wait for storage scan...
[ 7.820995] systemd[1]: Started Show Plymouth Boot Screen.
[ 7.821062] systemd[1]: Starting Forward Password Requests to Plymouth Directory Watch.
[ 7.821107] systemd[1]: Started Forward Password Requests to Plymouth Directory Watch.
[ 7.821124] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 7.821137] systemd[1]: Starting Paths.
[ 7.821169] systemd[1]: Reached target Paths.
[ 7.826051] Non-volatile memory driver v1.3
[ 7.828821] ACPI: Requesting acpi_cpufreq
[ 7.851648] systemd[1]: Started Wait for storage scan.
[ 7.851789] systemd[1]: Started Initialize storage subsystems (RAID, LVM, etc.).
[ 7.851805] systemd[1]: Started Initialize storage subsystems (RAID, LVM, etc.).
[ 7.878102] systemd[1]: Started Load legacy module configuration.
[ 8.039828] systemd[1]: Starting Load/Save Screen Backlight Brightness of acpi_video0...
[ 8.042973] systemd[1]: Started Load/Save Screen Backlight Brightness of acpi_video0.
[ 8.049035] ACPI: AC Adapter [ACAD] (on-line)
[ 8.049424] ACPI: Battery Slot [BAT1] (battery absent)
[ 8.072292] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 8.074016] ACPI: Fan [FAN] (off)
[ 8.081194] thermal LNXTHERM:00: registered as thermal_zone0
[ 8.081198] ACPI: Thermal Zone [THRM] (48 C)
[ 8.088099] hda_codec: ALC269VC: SKU not ready 0x909701f0
[ 8.088325] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 8.088328] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 8.088330] hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 8.088331] mono: mono_out=0x0
[ 8.088332] inputs:
[ 8.088334] Mic=0x18
[ 8.088336] Internal Mic=0x12
[ 8.088338] realtek: No valid SSID, checking pincfg 0x909701f0 for NID 0x1d
[ 8.088340] realtek: Enable default setup for auto mode as fallback
[ 8.089780] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
[ 8.135645] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x15
[ 8.212237] systemd[1]: Starting Printer.
[ 8.212272] systemd[1]: Reached target Printer.
[ 8.223839] input: Fujitsu FUJ02B1 as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/FUJ02B1:00/input/input8
[ 8.223892] fujitsu_laptop: ACPI: Fujitsu FUJ02B1 [FJEX] (on)
[ 8.224266] input: Fujitsu FUJ02E3 as /devices/LNXSYSTM:00/device:00/FUJ02E3:00/input/input9
[ 8.224300] fujitsu_laptop: ACPI: Fujitsu FUJ02E3 [FEXT] (on)
[ 8.224785] fujitsu_laptop: BTNI: [0x80001]
[ 8.224967] fujitsu_laptop: driver 0.6.0 successfully loaded
[ 8.239234] media: Linux media interface: v0.10
[ 8.255226] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 8.255313] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 8.255376] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 8.255627] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 8.255930] ACPI Warning: 0x000000000000efa0-0x000000000000efbf SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130725/utaddress-251)
[ 8.255938] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 8.256107] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130725/utaddress-251)
[ 8.256113] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 8.256117] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
[ 8.256122] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 8.256123] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
[ 8.256127] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 8.256129] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 8.265083] Bluetooth: Core ver 2.16
[ 8.265101] NET: Registered protocol family 31
[ 8.265103] Bluetooth: HCI device and connection manager initialized
[ 8.265111] Bluetooth: HCI socket layer initialized
[ 8.265115] Bluetooth: L2CAP socket layer initialized
[ 8.265120] Bluetooth: SCO socket layer initialized
[ 8.267441] usbcore: registered new interface driver btusb
[ 8.269744] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x15
[ 8.269766] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x15
[ 8.269782] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x15
[ 8.269928] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 8.283839] cfg80211: Calling CRDA to update world regulatory domain
[ 8.291779] usblp 3-3:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x04A9 pid 0x1766
[ 8.293186] usblp 3-3:1.2: usblp1: USB Bidirectional printer dev 3 if 2 alt 0 proto 2 vid 0x04A9 pid 0x1766
[ 8.293212] usbcore: registered new interface driver usblp
[ 8.526985] Linux video capture interface: v2.00
[ 8.535954] systemd[1]: Starting Sound Card.
[ 8.535991] systemd[1]: Reached target Sound Card.
[ 8.635769] systemd[1]: Mounted Configuration File System.
[ 8.635828] systemd[1]: Started Set Up Additional Binary Formats.
[ 8.635840] systemd[1]: Started Show Plymouth Boot Screen.
[ 8.635849] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 8.635861] systemd[1]: Mounted FUSE Control File System.
[ 8.635872] systemd[1]: Started Initialize storage subsystems (RAID, LVM, etc.).
[ 8.635883] systemd[1]: Started Initialize storage subsystems (RAID, LVM, etc.).
[ 8.635899] systemd[1]: Starting Import network configuration from initramfs...
[ 8.841161] uvcvideo: Found UVC 1.00 device FJ Camera (05c8:0344)
[ 8.852847] input: FJ Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input13
[ 8.853001] usbcore: registered new interface driver uvcvideo
[ 8.853005] USB Video Class driver (1.1.1)
[ 8.855955] iTCO_vendor_support: vendor-support=0
[ 8.856633] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 8.856670] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[ 8.856761] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1)
[ 8.933250] Intel(R) Wireless WiFi driver for Linux, in-tree:d
[ 8.933253] Copyright(c) 2003-2013 Intel Corporation
[ 8.933281] iwlwifi 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 8.933310] pcieport 0000:00:1c.1: driver skip pci_set_master, fix it!
[ 8.933520] iwlwifi 0000:02:00.0: irq 45 for MSI/MSI-X
[ 8.937741] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 8.937752] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 8.937758] pcieport 0000:00:1c.2: driver skip pci_set_master, fix it!
[ 8.937983] r8169 0000:03:00.0: irq 46 for MSI/MSI-X
[ 8.938136] r8169 0000:03:00.0 eth0: RTL8168evl/8111evl at 0xffffc90004796000, 5c:9a:d8:68:ca:59, XID 0c900800 IRQ 46
[ 8.938138] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 8.942783] systemd[1]: Started Import network configuration from initramfs.
[ 8.945452] systemd-udevd[510]: renamed network interface eth0 to enp3s0
[ 9.663515] iwlwifi 0000:02:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[ 9.698695] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG enabled
[ 9.698699] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[ 9.698700] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[ 9.698702] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Wireless-N 2230 BGN, REV=0xC8
[ 9.698795] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 9.718312] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 9.726130] systemd-udevd[515]: renamed network interface wlan0 to wlp2s0
[ 10.957394] systemd[1]: Found device ST500LT012-9WS142.
[ 10.957424] systemd[1]: Activating swap /dev/disk/by-uuid/e2bfad7f-c41a-4d72-b9e3-1a71e012be4c...
[ 10.972308] Adding 4087272k swap on /dev/sda5. Priority:-1 extents:1 across:4087272k FS
[ 10.973402] systemd[1]: Activated swap /dev/disk/by-uuid/e2bfad7f-c41a-4d72-b9e3-1a71e012be4c.
[ 10.973460] systemd[1]: Starting Swap.
[ 10.973479] systemd[1]: Reached target Swap.
[ 11.267943] systemd[1]: Found device ST500LT012-9WS142.
[ 11.267975] systemd[1]: Starting File System Check on /dev/disk/by-uuid/cf87db26-e4d8-408c-be7b-183bc8c16551...
[ 12.491194] systemd[1]: Started File System Check on /dev/disk/by-uuid/cf87db26-e4d8-408c-be7b-183bc8c16551.
[ 12.491326] systemd[1]: Mounting /home...
[ 14.127636] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: acl
[ 14.127893] systemd[1]: Mounted /home.
[ 14.127997] systemd[1]: Starting Local File Systems.
[ 14.128018] systemd[1]: Reached target Local File Systems.
[ 14.128028] systemd[1]: Starting Reconfigure the system on administrator request...
[ 14.129277] systemd[1]: Started Reconfigure the system on administrator request.
[ 14.129294] systemd[1]: Starting Save boot dmesg content...
[ 14.130447] systemd[1]: Started Mark the need to relabel after reboot.
[ 14.130512] systemd[1]: Started Relabel all filesystems, if necessary.
[ 14.130566] systemd[1]: Starting Recreate Volatile Files and Directories...
[ 14.146195] systemd[1]: Starting Tell Plymouth To Write Out Runtime Data...
[ 14.147096] systemd[1]: Starting Trigger Flushing of Journal to Persistent Storage...
[ 14.151309] systemd-journald[458]: Received request to flush runtime journal from PID 1
[ 17.753966] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 17.753970] Bluetooth: BNEP filters: protocol multicast
[ 17.753979] Bluetooth: BNEP socket layer initialized
[ 17.990894] microcode: Microcode Update Driver: v2.00 removed.
[ 17.996365] r8169 0000:03:00.0 enp3s0: link down
[ 17.996409] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 18.614504] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 18.622168] iwlwifi 0000:02:00.0: Radio type=0x2-0x0-0x0
[ 18.861086] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 18.868734] iwlwifi 0000:02:00.0: Radio type=0x2-0x0-0x0
[ 18.919376] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 18.941226] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 18.948871] iwlwifi 0000:02:00.0: Radio type=0x2-0x0-0x0
[ 19.001564] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 19.047009] NET: Registered protocol family 17
[ 19.404805] wlp2s0: authenticate with 00:26:44:2f:36:28
[ 19.410482] wlp2s0: send auth to 00:26:44:2f:36:28 (try 1/3)
[ 19.412437] wlp2s0: authenticated
[ 19.412455] wlp2s0: waiting for beacon from 00:26:44:2f:36:28
[ 19.450342] wlp2s0: associate with 00:26:44:2f:36:28 (try 1/3)
[ 19.455008] wlp2s0: RX AssocResp from 00:26:44:2f:36:28 (capab=0x411 status=0 aid=1)
[ 19.457562] wlp2s0: associated
[ 19.457589] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 21.583016] Loading kernel module for a network device with CAP_SYS_MODULE (deprecated). Use CAP_NET_ADMIN and alias netdev-eth0 instead.
[ 23.172879] Loading kernel module for a network device with CAP_SYS_MODULE (deprecated). Use CAP_NET_ADMIN and alias netdev-eth0 instead.
[ 24.753371] Loading kernel module for a network device with CAP_SYS_MODULE (deprecated). Use CAP_NET_ADMIN and alias netdev-eth0 instead.
[ 26.335720] Loading kernel module for a network device with CAP_SYS_MODULE (deprecated). Use CAP_NET_ADMIN and alias netdev-eth0 instead.
[ 27.915096] Loading kernel module for a network device with CAP_SYS_MODULE (deprecated). Use CAP_NET_ADMIN and alias netdev-eth0 instead.
[ 29.478599] Loading kernel module for a network device with CAP_SYS_MODULE (deprecated). Use CAP_NET_ADMIN and alias netdev-eth0 instead.
[ 31.043227] Loading kernel module for a network device with CAP_SYS_MODULE (deprecated). Use CAP_NET_ADMIN and alias netdev-eth0 instead.
[ 31.116428] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 31.131201] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 31.436255] Netfilter messages via NETLINK v0.30.
[ 31.449413] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 31.539276] xt_time: kernel timezone is +0300
[ 31.566387] ctnetlink v0.93: registering with nfnetlink.
[ 31.599677] ip_set: protocol 6
[ 31.638877] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
[ 31.818783] xt_addrtype: ipv6 does not support BROADCAST matching
[ 31.869719] ipt_ULOG: ULOG is deprecated and it will be removed soon, use NFLOG instead
[ 32.057361] xt_CT: No such helper "netbios-ns"
[ 32.061805] xt_CT: No such helper "pptp"
[ 32.070129] xt_CT: No such helper "irc"
[ 32.075139] xt_CT: No such helper "irc-0"
[ 32.080473] xt_CT: No such helper "snmp"
[ 32.210308] Bridge firewalling registered
[ 32.453248] u32 classifier
[ 32.453256] Actions configured
[ 32.532098] netfilter PSD loaded - (c) astaro AG
[ 32.533773] IFWLOG: register target
[ 49.982372] fuse init (API version 7.22)
[ 8828.927671] usb 3-3: USB disconnect, device number 3
[ 8828.928139] usblp0: removed
[ 8828.928486] usblp1: removed
[ 8832.157638] usb 3-3: new high-speed USB device number 4 using xhci_hcd
[ 8832.170715] usb 3-3: New USB device found, idVendor=04a9, idProduct=1766
[ 8832.170723] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 8832.170728] usb 3-3: Product: MX390 series
[ 8832.170733] usb 3-3: Manufacturer: Canon
[ 8832.170737] usb 3-3: SerialNumber: 916CC2
[ 8832.174722] usblp 3-3:1.1: usblp0: USB Bidirectional printer dev 4 if 1 alt 0 proto 2 vid 0x04A9 pid 0x1766
[ 8832.176258] usblp 3-3:1.2: usblp1: USB Bidirectional printer dev 4 if 2 alt 0 proto 2 vid 0x04A9 pid 0x1766
[ 9417.297460] warning: `growisofs' uses 32-bit capabilities (legacy support in use)
[ 9591.367686] usb 3-3: USB disconnect, device number 4
[ 9591.367942] usblp0: removed
[ 9591.368065] usblp1: removed
[ 9594.306871] usb 3-3: new high-speed USB device number 5 using xhci_hcd
[ 9594.320110] usb 3-3: New USB device found, idVendor=04a9, idProduct=1766
[ 9594.320117] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 9594.320121] usb 3-3: Product: MX390 series
[ 9594.320124] usb 3-3: Manufacturer: Canon
[ 9594.320127] usb 3-3: SerialNumber: 916CC2
[ 9594.324158] usblp 3-3:1.1: usblp0: USB Bidirectional printer dev 5 if 1 alt 0 proto 2 vid 0x04A9 pid 0x1766
[ 9594.325592] usblp 3-3:1.2: usblp1: USB Bidirectional printer dev 5 if 2 alt 0 proto 2 vid 0x04A9 pid 0x1766
[ 9601.839038] usb 3-3: USB disconnect, device number 5
[ 9601.839393] usblp0: removed
[ 9601.839583] usblp1: removed
[ 9604.106231] usb 3-3: new high-speed USB device number 6 using xhci_hcd
[ 9604.119499] usb 3-3: New USB device found, idVendor=04a9, idProduct=1766
[ 9604.119506] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 9604.119511] usb 3-3: Product: MX390 series
[ 9604.119514] usb 3-3: Manufacturer: Canon
[ 9604.119517] usb 3-3: SerialNumber: 916CC2
[ 9604.123371] usblp 3-3:1.1: usblp0: USB Bidirectional printer dev 6 if 1 alt 0 proto 2 vid 0x04A9 pid 0x1766
[ 9604.124865] usblp 3-3:1.2: usblp1: USB Bidirectional printer dev 6 if 2 alt 0 proto 2 vid 0x04A9 pid 0x1766
αν και ισως εχει και αλλα στην αρχη αλλα δεν τα εμφανιζει. Μπορειτε να καταλαβετε κατι απο αυτο?
[ 0.000000] node 0: [mem 0xdafff000-0xdaffffff]
[ 0.000000] node 0: [mem 0x100000000-0x11f5fffff]
[ 0.000000] On node 0 totalpages: 1012255
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13747 pages used for memmap
[ 0.000000] DMA32 zone: 879747 pages, LIFO batch:31
[ 0.000000] Normal zone: 2008 pages used for memmap
[ 0.000000] Normal zone: 128512 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc7505000-0xc7706fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd8085000-0xdaeeefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdaeef000-0xdaf9efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdaf9f000-0xdaffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdb000000-0xdf9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
[ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88011f200000 s84800 r8192 d21696 u262144
[ 0.000000] pcpu-alloc: s84800 r8192 d21696 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 996415
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.12.0-desktop-0.rc5.1.mga4 root=UUID=488e8e5a-1557-4507-a77b-9a59574e526e ro splash quiet resume=UUID=e2bfad7f-c41a-4d72-b9e3-1a71e012be4c
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3890548K/4049020K available (6282K kernel code, 870K rwdata, 3020K rodata, 1228K init, 912K bss, 158472K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
[ 0.000000] NR_IRQS:4352 nr_irqs:744 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.001000] tsc: Detected 2394.574 MHz processor
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4789.14 BogoMIPS (lpj=2394574)
[ 0.000004] pid_max: default: 32768 minimum: 301
[ 0.000022] Security Framework initialized
[ 0.000031] TOMOYO Linux initialized
[ 0.000297] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.001346] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.001810] Mount-cache hash table entries: 256
[ 0.001970] Initializing cgroup subsys devices
[ 0.001972] Initializing cgroup subsys freezer
[ 0.001974] Initializing cgroup subsys net_cls
[ 0.001975] Initializing cgroup subsys blkio
[ 0.001994] CPU: Physical Processor ID: 0
[ 0.001995] CPU: Processor Core ID: 0
[ 0.002000] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.002004] mce: CPU supports 7 MCE banks
[ 0.002015] CPU0: Thermal monitoring enabled (TM1)
[ 0.002022] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 1
[ 0.002156] Freeing SMP alternatives memory: 24K (ffffffff81e0e000 - ffffffff81e14000)
[ 0.003236] ACPI: Core revision 20130725
[ 0.008498] ACPI: All ACPI Tables successfully acquired
[ 0.008708] ftrace: allocating 23488 entries in 92 pages
[ 0.020439] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.030455] smpboot: CPU0: Intel(R) Core(TM) i3-3110M CPU @ 2.40GHz (fam: 06, model: 3a, stepping: 09)
[ 0.030462] TSC deadline timer enabled
[ 0.030470] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
[ 0.030476] ... version: 3
[ 0.030477] ... bit width: 48
[ 0.030478] ... generic registers: 4
[ 0.030479] ... value mask: 0000ffffffffffff
[ 0.030480] ... max period: 0000ffffffffffff
[ 0.030480] ... fixed-purpose events: 3
[ 0.030481] ... event mask: 000000070000000f
[ 0.031692] smpboot: Booting Node 0, Processors # 1 # 2 # 3 OK
[ 0.071462] Brought up 4 CPUs
[ 0.071465] smpboot: Total of 4 processors activated (19156.59 BogoMIPS)
[ 0.074716] devtmpfs: initialized
[ 0.077014] PM: Registering ACPI NVS region [mem 0xdaeef000-0xdaf9efff] (720896 bytes)
[ 0.077754] xor: automatically using best checksumming function:
[ 0.087528] avx : 16940.000 MB/sec
[ 0.087531] pinctrl core: initialized pinctrl subsystem
[ 0.087567] RTC time: 18:00:38, date: 10/16/13
[ 0.087598] NET: Registered protocol family 16
[ 0.087662] cpuidle: using governor ladder
[ 0.087664] cpuidle: using governor menu
[ 0.087689] ACPI: bus type PCI registered
[ 0.087691] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.087741] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.087743] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.093963] PCI: Using configuration type 1 for base access
[ 0.094077] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.094078] mtrr: probably your BIOS does not setup all CPUs.
[ 0.094078] mtrr: corrected configuration.
[ 0.094503] bio: create slab <bio-0> at 0
[ 0.111578] raid6: sse2x1 6574 MB/s
[ 0.128608] raid6: sse2x2 8125 MB/s
[ 0.145644] raid6: sse2x4 9437 MB/s
[ 0.145645] raid6: using algorithm sse2x4 (9437 MB/s)
[ 0.145647] raid6: using ssse3x2 recovery algorithm
[ 0.145689] ACPI: Added _OSI(Module Device)
[ 0.145690] ACPI: Added _OSI(Processor Device)
[ 0.145692] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.145693] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.146881] ACPI: EC: Look up EC in DSDT
[ 0.148019] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.162071] ACPI: SSDT 00000000dae8d018 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.162374] ACPI: Dynamic OEM Table Load:
[ 0.162376] ACPI: SSDT (null) 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.165921] ACPI: SSDT 00000000dae8ea98 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.166248] ACPI: Dynamic OEM Table Load:
[ 0.166249] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.168809] ACPI: SSDT 00000000daeedc18 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.169107] ACPI: Dynamic OEM Table Load:
[ 0.169108] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.172371] ACPI: Interpreter enabled
[ 0.172377] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571)
[ 0.172381] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
[ 0.172395] ACPI: (supports S0 S3 S4 S5)
[ 0.172396] ACPI: Using IOAPIC for interrupt routing
[ 0.172416] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.172535] ACPI: No dock devices found.
[ 0.178902] ACPI: Power Resource [QFAN] (off)
[ 0.179500] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.179559] \_SB_.PCI0:_OSC invalid revision
[ 0.179560] _OSC request data:1 8 0
[ 0.179614] \_SB_.PCI0:_OSC invalid revision
[ 0.179615] _OSC request data:1 1f 0
[ 0.179618] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.179620] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.180137] ACPI: \_SB_.PCI0.PDRC: can't evaluate _ADR (0x5)
[ 0.180219] PCI host bridge to bus 0000:00
[ 0.180222] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.180223] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.180225] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.180226] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.180228] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff]
[ 0.180235] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.180307] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.180318] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
[ 0.180324] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.180329] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
[ 0.180416] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.180440] pci 0000:00:14.0: reg 0x10: [mem 0xf0600000-0xf060ffff 64bit]
[ 0.180512] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.180548] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.180580] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.180603] pci 0000:00:16.0: reg 0x10: [mem 0xf0615000-0xf061500f 64bit]
[ 0.180680] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.180754] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.180777] pci 0000:00:1a.0: reg 0x10: [mem 0xf061a000-0xf061a3ff]
[ 0.180869] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.180919] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.180952] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.180968] pci 0000:00:1b.0: reg 0x10: [mem 0xf0610000-0xf0613fff 64bit]
[ 0.181038] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.181104] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.181185] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.181246] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 0.181326] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.181390] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[ 0.181470] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.181541] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.181562] pci 0000:00:1d.0: reg 0x10: [mem 0xf0619000-0xf06193ff]
[ 0.181653] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.181701] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.181730] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
[ 0.181895] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.181915] pci 0000:00:1f.2: reg 0x10: [io 0x3088-0x308f]
[ 0.181924] pci 0000:00:1f.2: reg 0x14: [io 0x3094-0x3097]
[ 0.181932] pci 0000:00:1f.2: reg 0x18: [io 0x3080-0x3087]
[ 0.181940] pci 0000:00:1f.2: reg 0x1c: [io 0x3090-0x3093]
[ 0.181949] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
[ 0.181956] pci 0000:00:1f.2: reg 0x24: [mem 0xf0618000-0xf06187ff]
[ 0.182003] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.182058] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.182075] pci 0000:00:1f.3: reg 0x10: [mem 0xf0614000-0xf06140ff 64bit]
[ 0.182096] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
[ 0.182222] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.182351] pci 0000:02:00.0: [8086:0887] type 00 class 0x028000
[ 0.182396] pci 0000:02:00.0: reg 0x10: [mem 0xf0500000-0xf0501fff 64bit]
[ 0.182621] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.183851] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.183858] pci 0000:00:1c.1: bridge window [mem 0xf0500000-0xf05fffff]
[ 0.183953] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 0.183973] pci 0000:03:00.0: reg 0x10: [io 0x2000-0x20ff]
[ 0.184009] pci 0000:03:00.0: reg 0x18: [mem 0xf0404000-0xf0404fff 64bit pref]
[ 0.184031] pci 0000:03:00.0: reg 0x20: [mem 0xf0400000-0xf0403fff 64bit pref]
[ 0.184126] pci 0000:03:00.0: supports D1 D2
[ 0.184127] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.184166] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.185808] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.185812] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.185821] pci 0000:00:1c.2: bridge window [mem 0xf0400000-0xf04fffff 64bit pref]
[ 0.186198] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.186247] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.186292] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[ 0.186338] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[ 0.186384] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.186431] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.186476] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.186522] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.186808] ACPI: Enabled 8 GPEs in block 00 to 3F
[ 0.186814] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.186858] Found 1 acpi root devices
[ 0.186884] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.186944] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.186946] vgaarb: loaded
[ 0.186947] vgaarb: bridge control possible 0000:00:02.0
[ 0.186993] SCSI subsystem initialized
[ 0.187032] libata version 3.00 loaded.
[ 0.187102] PCI: Using ACPI for IRQ routing
[ 0.188693] PCI: pci_cache_line_size set to 64 bytes
[ 0.188785] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
[ 0.188786] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[ 0.188788] e820: reserve RAM buffer [mem 0xc7505000-0xc7ffffff]
[ 0.188789] e820: reserve RAM buffer [mem 0xd8085000-0xdbffffff]
[ 0.188790] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff]
[ 0.188791] e820: reserve RAM buffer [mem 0x11f600000-0x11fffffff]
[ 0.188856] NetLabel: Initializing
[ 0.188858] NetLabel: domain hash size = 128
[ 0.188858] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.188867] NetLabel: unlabeled traffic allowed by default
[ 0.188892] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.188896] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.190927] Switched to clocksource hpet
[ 0.195477] pnp: PnP ACPI init
[ 0.195488] ACPI: bus type PNP registered
[ 0.195515] pnp 00:00: [dma 4]
[ 0.195532] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.195549] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.195626] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.195651] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.195689] system 00:04: [io 0x0680-0x069f] has been reserved
[ 0.195691] system 00:04: [io 0x1000-0x100f] has been reserved
[ 0.195693] system 00:04: [io 0xffff] has been reserved
[ 0.195694] system 00:04: [io 0xffff] has been reserved
[ 0.195697] system 00:04: [io 0x0400-0x0453] could not be reserved
[ 0.195698] system 00:04: [io 0x0458-0x047f] has been reserved
[ 0.195700] system 00:04: [io 0x0500-0x057f] has been reserved
[ 0.195701] system 00:04: [io 0x164e-0x164f] has been reserved
[ 0.195704] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.195725] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.195762] system 00:06: [io 0x0454-0x0457] has been reserved
[ 0.195764] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.195788] pnp 00:07: Plug and Play ACPI device, IDs FUJ0300 PNP0303 (active)
[ 0.195811] pnp 00:08: Plug and Play ACPI device, IDs ALP0403 PNP0f13 (active)
[ 0.195941] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.195943] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.195945] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.195947] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.195949] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.195950] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.195952] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.195953] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.195955] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.195957] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.195959] system 00:09: [mem 0xfffff000-0xffffffff] has been reserved
[ 0.195961] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.196173] pnp: PnP ACPI: found 10 devices
[ 0.196174] ACPI: bus type PNP unregistered
[ 0.202254] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.202268] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.202273] pci 0000:00:1c.1: bridge window [mem 0xf0500000-0xf05fffff]
[ 0.202281] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.202285] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.202292] pci 0000:00:1c.2: bridge window [mem 0xf0400000-0xf04fffff 64bit pref]
[ 0.202299] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.202301] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.202303] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.202304] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfeafffff]
[ 0.202306] pci_bus 0000:02: resource 1 [mem 0xf0500000-0xf05fffff]
[ 0.202308] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.202309] pci_bus 0000:03: resource 2 [mem 0xf0400000-0xf04fffff 64bit pref]
[ 0.202335] NET: Registered protocol family 2
[ 0.202466] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.202583] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.202665] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.202681] TCP: reno registered
[ 0.202688] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.202704] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.202756] NET: Registered protocol family 1
[ 0.202765] pci 0000:00:02.0: Boot video device
[ 0.203219] PCI: CLS 64 bytes, default 64
[ 0.203254] Trying to unpack rootfs image as initramfs...
[ 0.307326] Freeing initrd memory: 10248K (ffff880036bec000 - ffff8800375ee000)
[ 0.307330] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.307332] software IO TLB [mem 0xd4085000-0xd8085000] (64MB) mapped at [ffff8800d4085000-ffff8800d8084fff]
[ 0.307692] audit: initializing netlink socket (disabled)
[ 0.307701] type=2000 audit(1381946438.296:1): initialized
[ 0.330039] bounce pool size: 64 pages
[ 0.330059] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.330908] zbud: loaded
[ 0.331062] VFS: Disk quotas dquot_6.5.2
[ 0.331094] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.331433] bio: create slab <bio-1> at 1
[ 0.331544] Btrfs loaded
[ 0.331550] msgmni has been set to 7618
[ 0.331827] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.331856] io scheduler noop registered
[ 0.331857] io scheduler deadline registered
[ 0.331876] io scheduler cfq registered (default)
[ 0.332250] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.332260] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.332299] intel_idle: MWAIT substates: 0x21120
[ 0.332300] intel_idle: v0.4 model 0x3A
[ 0.332301] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.332401] GHES: HEST is not enabled!
[ 0.332437] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.332765] Linux agpgart interface v0.103
[ 0.333668] brd: module loaded
[ 0.333777] mei_me 0000:00:16.0: setting latency timer to 64
[ 0.333804] mei_me 0000:00:16.0: irq 40 for MSI/MSI-X
[ 0.336744] ahci 0000:00:1f.2: version 3.0
[ 0.336828] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[ 0.336853] ahci: SSS flag set, parallel bus scan disabled
[ 0.347118] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
[ 0.347122] ahci 0000:00:1f.2: flags: 64bit ncq stag led clo pio ems apst
[ 0.347126] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.349469] scsi0 : ahci
[ 0.349590] scsi1 : ahci
[ 0.349711] scsi2 : ahci
[ 0.349838] scsi3 : ahci
[ 0.349909] scsi4 : ahci
[ 0.349964] scsi5 : ahci
[ 0.349988] ata1: SATA max UDMA/133 abar m2048@0xf0618000 port 0xf0618100 irq 41
[ 0.349990] ata2: DUMMY
[ 0.349993] ata3: SATA max UDMA/133 abar m2048@0xf0618000 port 0xf0618200 irq 41
[ 0.349993] ata4: DUMMY
[ 0.349994] ata5: DUMMY
[ 0.349995] ata6: DUMMY
[ 0.350052] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.352305] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.352309] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.352395] mousedev: PS/2 mouse device common for all mice
[ 0.352490] rtc_cmos 00:05: RTC can wake from S4
[ 0.352620] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.352648] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.352656] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.352738] TCP: cubic registered
[ 0.352743] Key type dns_resolver registered
[ 0.352744] mpls_gso: MPLS GSO support
[ 0.352899] PM: Checking hibernation image partition UUID=e2bfad7f-c41a-4d72-b9e3-1a71e012be4c
[ 0.359456] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.655374] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.664935] ata1.00: ACPI cmd ef/90:03:00:00:00:a0 (SET FEATURES) succeeded
[ 0.664939] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 0.665574] ata1.00: ATA-8: ST500LT012-9WS142, 0001SDM1, max UDMA/133
[ 0.665578] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 0.706674] ata1.00: ACPI cmd ef/90:03:00:00:00:a0 (SET FEATURES) succeeded
[ 0.706677] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 0.707298] ata1.00: configured for UDMA/133
[ 0.707499] scsi 0:0:0:0: Direct-Access ATA ST500LT012-9WS14 0001 PQ: 0 ANSI: 5
[ 0.707664] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 0.707667] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 0.707819] sd 0:0:0:0: [sda] Write Protect is off
[ 0.707823] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.707859] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.731478] sda: sda1 sda2 < sda5 sda6 >
[ 0.732263] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.758871] psmouse serio1: alps: Unknown ALPS touchpad: E7=73 03 50, EC=73 02 02
[ 1.012678] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.014494] ata3.00: ATAPI: MATSHITADVD-RAM UJ8A2AS, 1.40, max UDMA/100
[ 1.016616] ata3.00: configured for UDMA/100
[ 1.018617] scsi 2:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8A2AS 1.40 PQ: 0 ANSI: 5
[ 1.309923] tsc: Refined TSC clocksource calibration: 2394.560 MHz
[ 1.515870] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input1
[ 1.518688] PM: Hibernation image not present or could not be loaded.
[ 1.518709] registered taskstats version 1
[ 1.519132] Magic number: 1:99:39
[ 1.519226] rtc_cmos 00:05: setting system clock to 2013-10-16 18:00:39 UTC (1381946439)
[ 1.519228] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.519229] EDD information not available.
[ 1.519947] Freeing unused kernel memory: 1228K (ffffffff81cdb000 - ffffffff81e0e000)
[ 1.519948] Write protecting the kernel read-only data: 12288k
[ 1.523811] Freeing unused kernel memory: 1900K (ffff880001625000 - ffff880001800000)
[ 1.525887] Freeing unused kernel memory: 1076K (ffff880001af3000 - ffff880001c00000)
[ 1.563994] dracut: dracut-034
[ 1.627745] systemd-udevd[192]: starting version 208
[ 1.666476] [drm] Initialized drm 1.1.0 20060810
[ 1.670949] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 1.670955] ACPI: Power Button [PWRB]
[ 1.671018] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[ 1.671285] ACPI: Lid Switch [LID0]
[ 1.671468] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 1.671473] ACPI: Power Button [PWRF]
[ 1.705538] [drm] Memory usable by graphics device = 2048M
[ 1.705545] i915 0000:00:02.0: setting latency timer to 64
[ 1.734415] i915 0000:00:02.0: irq 42 for MSI/MSI-X
[ 1.734425] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 1.734427] [drm] Driver supports precise vblank timestamp query.
[ 1.734479] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.770193] fbcon: inteldrmfb (fb0) is primary device
[ 2.310918] Switched to clocksource tsc
[ 2.513547] Console: switching to colour frame buffer device 170x48
[ 2.516062] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 2.516063] i915 0000:00:02.0: registered panic notifier
[ 2.524720] acpi device:3b: registered as cooling_device0
[ 2.524951] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.525009] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
[ 2.525054] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 2.527441] dracut: Starting plymouth daemon
[ 3.720279] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[ 3.732257] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.732262] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.732382] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 3.745803] ACPI: bus type USB registered
[ 3.745837] usbcore: registered new interface driver usbfs
[ 3.745849] usbcore: registered new interface driver hub
[ 3.745899] usbcore: registered new device driver usb
[ 3.752934] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.753663] ehci-pci: EHCI PCI platform driver
[ 3.753817] ehci-pci 0000:00:1a.0: setting latency timer to 64
[ 3.753829] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 3.753836] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 3.753853] ehci-pci 0000:00:1a.0: debug port 2
[ 3.757780] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 3.757999] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf061a000
[ 3.763982] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 3.764027] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.764029] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.764030] usb usb1: Product: EHCI Host Controller
[ 3.764032] usb usb1: Manufacturer: Linux 3.12.0-desktop-0.rc5.1.mga4 ehci_hcd
[ 3.764033] usb usb1: SerialNumber: 0000:00:1a.0
[ 3.764155] hub 1-0:1.0: USB hub found
[ 3.764163] hub 1-0:1.0: 3 ports detected
[ 3.764442] ehci-pci 0000:00:1d.0: setting latency timer to 64
[ 3.764450] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 3.764458] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 3.764474] ehci-pci 0000:00:1d.0: debug port 2
[ 3.768375] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 3.768395] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf0619000
[ 3.773988] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 3.774027] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.774029] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.774031] usb usb2: Product: EHCI Host Controller
[ 3.774032] usb usb2: Manufacturer: Linux 3.12.0-desktop-0.rc5.1.mga4 ehci_hcd
[ 3.774034] usb usb2: SerialNumber: 0000:00:1d.0
[ 3.774151] hub 2-0:1.0: USB hub found
[ 3.774161] hub 2-0:1.0: 3 ports detected
[ 3.774432] xhci_hcd 0000:00:14.0: setting latency timer to 64
[ 3.774438] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 3.774445] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 3.774555] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 3.774586] xhci_hcd 0000:00:14.0: irq 43 for MSI/MSI-X
[ 3.774966] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.774970] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.774972] usb usb3: Product: xHCI Host Controller
[ 3.774988] usb usb3: Manufacturer: Linux 3.12.0-desktop-0.rc5.1.mga4 xhci_hcd
[ 3.774990] usb usb3: SerialNumber: 0000:00:14.0
[ 3.775118] hub 3-0:1.0: USB hub found
[ 3.775132] hub 3-0:1.0: 4 ports detected
[ 3.775487] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 3.775492] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 3.775535] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 3.775537] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.775538] usb usb4: Product: xHCI Host Controller
[ 3.775539] usb usb4: Manufacturer: Linux 3.12.0-desktop-0.rc5.1.mga4 xhci_hcd
[ 3.775541] usb usb4: SerialNumber: 0000:00:14.0
[ 3.775617] hub 4-0:1.0: USB hub found
[ 3.775626] hub 4-0:1.0: 4 ports detected
[ 4.066340] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 4.180711] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 4.180714] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.180945] hub 1-1:1.0: USB hub found
[ 4.181049] hub 1-1:1.0: 6 ports detected
[ 4.284471] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 4.292610] PM: Marking nosave pages: [mem 0x0009d000-0x000fffff]
[ 4.292618] PM: Marking nosave pages: [mem 0x20000000-0x201fffff]
[ 4.292626] PM: Marking nosave pages: [mem 0x40004000-0x40004fff]
[ 4.292628] PM: Marking nosave pages: [mem 0xc7505000-0xc7706fff]
[ 4.292636] PM: Marking nosave pages: [mem 0xd8085000-0xdaffefff]
[ 4.292796] PM: Marking nosave pages: [mem 0xdb000000-0xffffffff]
[ 4.293338] PM: Basic memory bitmaps created
[ 4.308633] PM: Basic memory bitmaps freed
[ 4.308646] video LNXVIDEO:00: Restoring backlight state
[ 4.311047] PM: Starting manual resume from disk
[ 4.311051] PM: Hibernation image partition 8:5 present
[ 4.311052] PM: Looking for hibernation image.
[ 4.352407] PM: Image not found (code -22)
[ 4.352410] PM: Hibernation image not present or could not be loaded.
[ 4.398858] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 4.398861] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.399120] hub 2-1:1.0: USB hub found
[ 4.399207] hub 2-1:1.0: 6 ports detected
[ 4.415644] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 4.486788] dracut: Checking ext4: /dev/disk/by-uuid/488e8e5a-1557-4507-a77b-9a59574e526e
[ 4.486943] dracut: issuing e2fsck -a /dev/disk/by-uuid/488e8e5a-1557-4507-a77b-9a59574e526e
[ 4.530194] dracut: /dev/disk/by-uuid/488e8e5a-1557-4507-a77b-9a59574e526e: clean, 106102/788416 files, 1125760/3148484 blocks
[ 4.531581] dracut: Mounting /dev/disk/by-uuid/488e8e5a-1557-4507-a77b-9a59574e526e with -o acl,noatime,ro
[ 4.553721] usb 3-2: new low-speed USB device number 2 using xhci_hcd
[ 4.569391] usb 3-2: New USB device found, idVendor=15d9, idProduct=0a4c
[ 4.569395] usb 3-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 4.569397] usb 3-2: Product: USB OPTICAL MOUSE
[ 4.569554] usb 3-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 4.575313] hidraw: raw HID events driver (C) Jiri Kosina
[ 4.577315] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: acl
[ 4.579957] usbcore: registered new interface driver usbhid
[ 4.579959] usbhid: USB HID core driver
[ 4.580572] input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/input/input6
[ 4.580652] hid-generic 0003:15D9:0A4C.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:14.0-2/input0
[ 4.627441] dracut: Mounted root filesystem /dev/sda1
[ 4.722818] usb 3-3: new high-speed USB device number 3 using xhci_hcd
[ 4.736001] usb 3-3: New USB device found, idVendor=04a9, idProduct=1766
[ 4.736015] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.736017] usb 3-3: Product: MX390 series
[ 4.736018] usb 3-3: Manufacturer: Canon
[ 4.736020] usb 3-3: SerialNumber: 916CC2
[ 4.800139] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
[ 4.873303] dracut: Switching root
[ 4.874798] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[ 4.890645] usb 1-1.1: New USB device found, idVendor=8087, idProduct=07da
[ 4.890648] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.964063] usb 1-1.4: new high-speed USB device number 4 using ehci-pci
[ 5.139227] usb 1-1.4: New USB device found, idVendor=05c8, idProduct=0344
[ 5.139232] usb 1-1.4: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 5.139234] usb 1-1.4: Product: FJ Camera
[ 5.139235] usb 1-1.4: Manufacturer: Generic
[ 5.139237] usb 1-1.4: SerialNumber: 200901010001
[ 5.412450] systemd[1]: systemd 208 running in system mode. (+PAM +LIBWRAP +AUDIT -SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 5.602905] systemd[1]: Inserted module 'autofs4'
[ 5.686734] NET: Registered protocol family 10
[ 5.686935] systemd[1]: Inserted module 'ipv6'
[ 5.692464] systemd[1]: Set hostname to <localhost>.
[ 6.643525] systemd[1]: Starting Collect Read-Ahead Data...
[ 6.644717] systemd[1]: Starting Replay Read-Ahead Data...
[ 6.645878] systemd[1]: Starting Login Prompts.
[ 6.645941] systemd[1]: Reached target Login Prompts.
[ 6.645964] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 6.646022] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 6.646035] systemd[1]: Starting RPC Port Mapper.
[ 6.646077] systemd[1]: Reached target RPC Port Mapper.
[ 6.646093] systemd[1]: Starting Remote File Systems.
[ 6.646132] systemd[1]: Reached target Remote File Systems.
[ 6.646156] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 6.646218] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 6.646232] systemd[1]: Starting Delayed Shutdown Socket.
[ 6.646301] systemd[1]: Listening on Delayed Shutdown Socket.
[ 6.646322] systemd[1]: Starting Encrypted Volumes.
[ 6.646359] systemd[1]: Reached target Encrypted Volumes.
[ 6.646390] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 6.646533] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 6.646552] systemd[1]: Starting Journal Socket.
[ 6.646630] systemd[1]: Listening on Journal Socket.
[ 6.646643] systemd[1]: Starting Set default kernel console loglevel...
[ 6.662476] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 6.663585] systemd[1]: Mounting POSIX Message Queue File System...
[ 6.664717] systemd[1]: Mounting Debug File System...
[ 6.665855] systemd[1]: Mounting Huge Pages File System...
[ 6.667071] systemd[1]: Starting Journal Service...
[ 6.668317] systemd[1]: Started Journal Service.
[ 6.668537] systemd[1]: Expecting device dev-disk-by\x2duuid-e2bfad7f\x2dc41a\x2d4d72\x2db9e3\x2d1a71e012be4c.device...
[ 6.668562] systemd[1]: Starting Configure read-only root support...
[ 6.669719] systemd[1]: Starting udev Kernel Socket.
[ 6.669787] systemd[1]: Listening on udev Kernel Socket.
[ 6.669814] systemd[1]: Starting udev Control Socket.
[ 6.669858] systemd[1]: Listening on udev Control Socket.
[ 6.669876] systemd[1]: Starting udev Coldplug all Devices...
[ 6.671178] systemd[1]: Mounting Temporary Directory...
[ 6.671411] systemd-readahead[452]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day.
[ 7.003668] systemd-journald[458]: Vacuuming done, freed 0 bytes
[ 7.025060] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
[ 7.026186] systemd[1]: Started Import network configuration from initramfs.
[ 7.026217] systemd[1]: Starting Root Slice.
[ 7.026283] systemd[1]: Created slice Root Slice.
[ 7.026294] systemd[1]: Starting User and Session Slice.
[ 7.026397] systemd[1]: Created slice User and Session Slice.
[ 7.026415] systemd[1]: Starting System Slice.
[ 7.026446] systemd[1]: Created slice System Slice.
[ 7.026463] systemd[1]: Starting system-getty.slice.
[ 7.026556] systemd[1]: Created slice system-getty.slice.
[ 7.026570] systemd[1]: Starting Slices.
[ 7.026591] systemd[1]: Reached target Slices.
[ 7.026606] systemd[1]: Expecting device dev-disk-by\x2duuid-cf87db26\x2de4d8\x2d408c\x2dbe7b\x2d183bc8c16551.device...
[ 7.028522] systemd[1]: Started Collect Read-Ahead Data.
[ 7.028670] systemd[1]: Started Replay Read-Ahead Data.
[ 7.028907] systemd[1]: Started Set default kernel console loglevel.
[ 7.041040] systemd[1]: Starting Load legacy module configuration...
[ 7.042175] systemd[1]: Starting Setup Virtual Console...
[ 7.062876] systemd[1]: Starting Load Kernel Modules...
[ 7.065121] systemd[1]: Started Set Up Additional Binary Formats.
[ 7.065143] systemd[1]: Starting File System Check on Root Device...
[ 7.066501] systemd[1]: Starting Apply Kernel Variables...
[ 7.068243] systemd[1]: Started udev Coldplug all Devices.
[ 7.068363] systemd[1]: Starting udev Wait for Complete Device Initialization...
[ 7.125143] systemd[1]: Started Apply Kernel Variables.
[ 7.128725] systemd[1]: Started Setup Virtual Console.
[ 7.400905] systemd[1]: Mounted Temporary Directory.
[ 7.401254] systemd[1]: Mounted Huge Pages File System.
[ 7.401362] systemd[1]: Mounted Debug File System.
[ 7.401444] systemd[1]: Mounted POSIX Message Queue File System.
[ 7.401825] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 7.402029] systemd[1]: Started File System Check on Root Device.
[ 7.402123] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 7.403226] systemd[1]: Starting Create static device nodes in /dev...
[ 7.429663] systemd[1]: Started Create static device nodes in /dev.
[ 7.429777] systemd[1]: Starting udev Kernel Device Manager...
[ 7.432523] systemd-udevd[489]: starting version 208
[ 7.432601] systemd[1]: Started udev Kernel Device Manager.
[ 7.454465] systemd[1]: Started Load Kernel Modules.
[ 7.454598] systemd[1]: Mounted FUSE Control File System.
[ 7.454621] systemd[1]: Mounted Configuration File System.
[ 7.581189] EXT4-fs (sda1): re-mounted. Opts: acl
[ 7.581908] systemd[1]: Started Remount Root and Kernel File Systems.
[ 7.582034] systemd[1]: Starting Load/Save Random Seed...
[ 7.583189] systemd[1]: Starting Local File Systems (Pre).
[ 7.583242] systemd[1]: Reached target Local File Systems (Pre).
[ 7.584410] systemd[1]: Started Load/Save Random Seed.
[ 7.769201] systemd[1]: Started Configure read-only root support.
[ 7.819771] systemd[1]: Started udev Wait for Complete Device Initialization.
[ 7.819887] systemd[1]: Starting Wait for storage scan...
[ 7.820995] systemd[1]: Started Show Plymouth Boot Screen.
[ 7.821062] systemd[1]: Starting Forward Password Requests to Plymouth Directory Watch.
[ 7.821107] systemd[1]: Started Forward Password Requests to Plymouth Directory Watch.
[ 7.821124] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 7.821137] systemd[1]: Starting Paths.
[ 7.821169] systemd[1]: Reached target Paths.
[ 7.826051] Non-volatile memory driver v1.3
[ 7.828821] ACPI: Requesting acpi_cpufreq
[ 7.851648] systemd[1]: Started Wait for storage scan.
[ 7.851789] systemd[1]: Started Initialize storage subsystems (RAID, LVM, etc.).
[ 7.851805] systemd[1]: Started Initialize storage subsystems (RAID, LVM, etc.).
[ 7.878102] systemd[1]: Started Load legacy module configuration.
[ 8.039828] systemd[1]: Starting Load/Save Screen Backlight Brightness of acpi_video0...
[ 8.042973] systemd[1]: Started Load/Save Screen Backlight Brightness of acpi_video0.
[ 8.049035] ACPI: AC Adapter [ACAD] (on-line)
[ 8.049424] ACPI: Battery Slot [BAT1] (battery absent)
[ 8.072292] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 8.074016] ACPI: Fan [FAN] (off)
[ 8.081194] thermal LNXTHERM:00: registered as thermal_zone0
[ 8.081198] ACPI: Thermal Zone [THRM] (48 C)
[ 8.088099] hda_codec: ALC269VC: SKU not ready 0x909701f0
[ 8.088325] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 8.088328] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 8.088330] hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 8.088331] mono: mono_out=0x0
[ 8.088332] inputs:
[ 8.088334] Mic=0x18
[ 8.088336] Internal Mic=0x12
[ 8.088338] realtek: No valid SSID, checking pincfg 0x909701f0 for NID 0x1d
[ 8.088340] realtek: Enable default setup for auto mode as fallback
[ 8.089780] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
[ 8.135645] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x15
[ 8.212237] systemd[1]: Starting Printer.
[ 8.212272] systemd[1]: Reached target Printer.
[ 8.223839] input: Fujitsu FUJ02B1 as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/FUJ02B1:00/input/input8
[ 8.223892] fujitsu_laptop: ACPI: Fujitsu FUJ02B1 [FJEX] (on)
[ 8.224266] input: Fujitsu FUJ02E3 as /devices/LNXSYSTM:00/device:00/FUJ02E3:00/input/input9
[ 8.224300] fujitsu_laptop: ACPI: Fujitsu FUJ02E3 [FEXT] (on)
[ 8.224785] fujitsu_laptop: BTNI: [0x80001]
[ 8.224967] fujitsu_laptop: driver 0.6.0 successfully loaded
[ 8.239234] media: Linux media interface: v0.10
[ 8.255226] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 8.255313] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 8.255376] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 8.255627] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 8.255930] ACPI Warning: 0x000000000000efa0-0x000000000000efbf SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130725/utaddress-251)
[ 8.255938] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 8.256107] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130725/utaddress-251)
[ 8.256113] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 8.256117] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
[ 8.256122] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 8.256123] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
[ 8.256127] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 8.256129] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 8.265083] Bluetooth: Core ver 2.16
[ 8.265101] NET: Registered protocol family 31
[ 8.265103] Bluetooth: HCI device and connection manager initialized
[ 8.265111] Bluetooth: HCI socket layer initialized
[ 8.265115] Bluetooth: L2CAP socket layer initialized
[ 8.265120] Bluetooth: SCO socket layer initialized
[ 8.267441] usbcore: registered new interface driver btusb
[ 8.269744] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x15
[ 8.269766] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x15
[ 8.269782] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x15
[ 8.269928] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 8.283839] cfg80211: Calling CRDA to update world regulatory domain
[ 8.291779] usblp 3-3:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x04A9 pid 0x1766
[ 8.293186] usblp 3-3:1.2: usblp1: USB Bidirectional printer dev 3 if 2 alt 0 proto 2 vid 0x04A9 pid 0x1766
[ 8.293212] usbcore: registered new interface driver usblp
[ 8.526985] Linux video capture interface: v2.00
[ 8.535954] systemd[1]: Starting Sound Card.
[ 8.535991] systemd[1]: Reached target Sound Card.
[ 8.635769] systemd[1]: Mounted Configuration File System.
[ 8.635828] systemd[1]: Started Set Up Additional Binary Formats.
[ 8.635840] systemd[1]: Started Show Plymouth Boot Screen.
[ 8.635849] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 8.635861] systemd[1]: Mounted FUSE Control File System.
[ 8.635872] systemd[1]: Started Initialize storage subsystems (RAID, LVM, etc.).
[ 8.635883] systemd[1]: Started Initialize storage subsystems (RAID, LVM, etc.).
[ 8.635899] systemd[1]: Starting Import network configuration from initramfs...
[ 8.841161] uvcvideo: Found UVC 1.00 device FJ Camera (05c8:0344)
[ 8.852847] input: FJ Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input13
[ 8.853001] usbcore: registered new interface driver uvcvideo
[ 8.853005] USB Video Class driver (1.1.1)
[ 8.855955] iTCO_vendor_support: vendor-support=0
[ 8.856633] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 8.856670] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[ 8.856761] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1)
[ 8.933250] Intel(R) Wireless WiFi driver for Linux, in-tree:d
[ 8.933253] Copyright(c) 2003-2013 Intel Corporation
[ 8.933281] iwlwifi 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 8.933310] pcieport 0000:00:1c.1: driver skip pci_set_master, fix it!
[ 8.933520] iwlwifi 0000:02:00.0: irq 45 for MSI/MSI-X
[ 8.937741] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 8.937752] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 8.937758] pcieport 0000:00:1c.2: driver skip pci_set_master, fix it!
[ 8.937983] r8169 0000:03:00.0: irq 46 for MSI/MSI-X
[ 8.938136] r8169 0000:03:00.0 eth0: RTL8168evl/8111evl at 0xffffc90004796000, 5c:9a:d8:68:ca:59, XID 0c900800 IRQ 46
[ 8.938138] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 8.942783] systemd[1]: Started Import network configuration from initramfs.
[ 8.945452] systemd-udevd[510]: renamed network interface eth0 to enp3s0
[ 9.663515] iwlwifi 0000:02:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[ 9.698695] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG enabled
[ 9.698699] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[ 9.698700] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[ 9.698702] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Wireless-N 2230 BGN, REV=0xC8
[ 9.698795] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 9.718312] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 9.726130] systemd-udevd[515]: renamed network interface wlan0 to wlp2s0
[ 10.957394] systemd[1]: Found device ST500LT012-9WS142.
[ 10.957424] systemd[1]: Activating swap /dev/disk/by-uuid/e2bfad7f-c41a-4d72-b9e3-1a71e012be4c...
[ 10.972308] Adding 4087272k swap on /dev/sda5. Priority:-1 extents:1 across:4087272k FS
[ 10.973402] systemd[1]: Activated swap /dev/disk/by-uuid/e2bfad7f-c41a-4d72-b9e3-1a71e012be4c.
[ 10.973460] systemd[1]: Starting Swap.
[ 10.973479] systemd[1]: Reached target Swap.
[ 11.267943] systemd[1]: Found device ST500LT012-9WS142.
[ 11.267975] systemd[1]: Starting File System Check on /dev/disk/by-uuid/cf87db26-e4d8-408c-be7b-183bc8c16551...
[ 12.491194] systemd[1]: Started File System Check on /dev/disk/by-uuid/cf87db26-e4d8-408c-be7b-183bc8c16551.
[ 12.491326] systemd[1]: Mounting /home...
[ 14.127636] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: acl
[ 14.127893] systemd[1]: Mounted /home.
[ 14.127997] systemd[1]: Starting Local File Systems.
[ 14.128018] systemd[1]: Reached target Local File Systems.
[ 14.128028] systemd[1]: Starting Reconfigure the system on administrator request...
[ 14.129277] systemd[1]: Started Reconfigure the system on administrator request.
[ 14.129294] systemd[1]: Starting Save boot dmesg content...
[ 14.130447] systemd[1]: Started Mark the need to relabel after reboot.
[ 14.130512] systemd[1]: Started Relabel all filesystems, if necessary.
[ 14.130566] systemd[1]: Starting Recreate Volatile Files and Directories...
[ 14.146195] systemd[1]: Starting Tell Plymouth To Write Out Runtime Data...
[ 14.147096] systemd[1]: Starting Trigger Flushing of Journal to Persistent Storage...
[ 14.151309] systemd-journald[458]: Received request to flush runtime journal from PID 1
[ 17.753966] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 17.753970] Bluetooth: BNEP filters: protocol multicast
[ 17.753979] Bluetooth: BNEP socket layer initialized
[ 17.990894] microcode: Microcode Update Driver: v2.00 removed.
[ 17.996365] r8169 0000:03:00.0 enp3s0: link down
[ 17.996409] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 18.614504] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 18.622168] iwlwifi 0000:02:00.0: Radio type=0x2-0x0-0x0
[ 18.861086] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 18.868734] iwlwifi 0000:02:00.0: Radio type=0x2-0x0-0x0
[ 18.919376] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 18.941226] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 18.948871] iwlwifi 0000:02:00.0: Radio type=0x2-0x0-0x0
[ 19.001564] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 19.047009] NET: Registered protocol family 17
[ 19.404805] wlp2s0: authenticate with 00:26:44:2f:36:28
[ 19.410482] wlp2s0: send auth to 00:26:44:2f:36:28 (try 1/3)
[ 19.412437] wlp2s0: authenticated
[ 19.412455] wlp2s0: waiting for beacon from 00:26:44:2f:36:28
[ 19.450342] wlp2s0: associate with 00:26:44:2f:36:28 (try 1/3)
[ 19.455008] wlp2s0: RX AssocResp from 00:26:44:2f:36:28 (capab=0x411 status=0 aid=1)
[ 19.457562] wlp2s0: associated
[ 19.457589] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 21.583016] Loading kernel module for a network device with CAP_SYS_MODULE (deprecated). Use CAP_NET_ADMIN and alias netdev-eth0 instead.
[ 23.172879] Loading kernel module for a network device with CAP_SYS_MODULE (deprecated). Use CAP_NET_ADMIN and alias netdev-eth0 instead.
[ 24.753371] Loading kernel module for a network device with CAP_SYS_MODULE (deprecated). Use CAP_NET_ADMIN and alias netdev-eth0 instead.
[ 26.335720] Loading kernel module for a network device with CAP_SYS_MODULE (deprecated). Use CAP_NET_ADMIN and alias netdev-eth0 instead.
[ 27.915096] Loading kernel module for a network device with CAP_SYS_MODULE (deprecated). Use CAP_NET_ADMIN and alias netdev-eth0 instead.
[ 29.478599] Loading kernel module for a network device with CAP_SYS_MODULE (deprecated). Use CAP_NET_ADMIN and alias netdev-eth0 instead.
[ 31.043227] Loading kernel module for a network device with CAP_SYS_MODULE (deprecated). Use CAP_NET_ADMIN and alias netdev-eth0 instead.
[ 31.116428] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 31.131201] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 31.436255] Netfilter messages via NETLINK v0.30.
[ 31.449413] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 31.539276] xt_time: kernel timezone is +0300
[ 31.566387] ctnetlink v0.93: registering with nfnetlink.
[ 31.599677] ip_set: protocol 6
[ 31.638877] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
[ 31.818783] xt_addrtype: ipv6 does not support BROADCAST matching
[ 31.869719] ipt_ULOG: ULOG is deprecated and it will be removed soon, use NFLOG instead
[ 32.057361] xt_CT: No such helper "netbios-ns"
[ 32.061805] xt_CT: No such helper "pptp"
[ 32.070129] xt_CT: No such helper "irc"
[ 32.075139] xt_CT: No such helper "irc-0"
[ 32.080473] xt_CT: No such helper "snmp"
[ 32.210308] Bridge firewalling registered
[ 32.453248] u32 classifier
[ 32.453256] Actions configured
[ 32.532098] netfilter PSD loaded - (c) astaro AG
[ 32.533773] IFWLOG: register target
[ 49.982372] fuse init (API version 7.22)
[ 8828.927671] usb 3-3: USB disconnect, device number 3
[ 8828.928139] usblp0: removed
[ 8828.928486] usblp1: removed
[ 8832.157638] usb 3-3: new high-speed USB device number 4 using xhci_hcd
[ 8832.170715] usb 3-3: New USB device found, idVendor=04a9, idProduct=1766
[ 8832.170723] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 8832.170728] usb 3-3: Product: MX390 series
[ 8832.170733] usb 3-3: Manufacturer: Canon
[ 8832.170737] usb 3-3: SerialNumber: 916CC2
[ 8832.174722] usblp 3-3:1.1: usblp0: USB Bidirectional printer dev 4 if 1 alt 0 proto 2 vid 0x04A9 pid 0x1766
[ 8832.176258] usblp 3-3:1.2: usblp1: USB Bidirectional printer dev 4 if 2 alt 0 proto 2 vid 0x04A9 pid 0x1766
[ 9417.297460] warning: `growisofs' uses 32-bit capabilities (legacy support in use)
[ 9591.367686] usb 3-3: USB disconnect, device number 4
[ 9591.367942] usblp0: removed
[ 9591.368065] usblp1: removed
[ 9594.306871] usb 3-3: new high-speed USB device number 5 using xhci_hcd
[ 9594.320110] usb 3-3: New USB device found, idVendor=04a9, idProduct=1766
[ 9594.320117] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 9594.320121] usb 3-3: Product: MX390 series
[ 9594.320124] usb 3-3: Manufacturer: Canon
[ 9594.320127] usb 3-3: SerialNumber: 916CC2
[ 9594.324158] usblp 3-3:1.1: usblp0: USB Bidirectional printer dev 5 if 1 alt 0 proto 2 vid 0x04A9 pid 0x1766
[ 9594.325592] usblp 3-3:1.2: usblp1: USB Bidirectional printer dev 5 if 2 alt 0 proto 2 vid 0x04A9 pid 0x1766
[ 9601.839038] usb 3-3: USB disconnect, device number 5
[ 9601.839393] usblp0: removed
[ 9601.839583] usblp1: removed
[ 9604.106231] usb 3-3: new high-speed USB device number 6 using xhci_hcd
[ 9604.119499] usb 3-3: New USB device found, idVendor=04a9, idProduct=1766
[ 9604.119506] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 9604.119511] usb 3-3: Product: MX390 series
[ 9604.119514] usb 3-3: Manufacturer: Canon
[ 9604.119517] usb 3-3: SerialNumber: 916CC2
[ 9604.123371] usblp 3-3:1.1: usblp0: USB Bidirectional printer dev 6 if 1 alt 0 proto 2 vid 0x04A9 pid 0x1766
[ 9604.124865] usblp 3-3:1.2: usblp1: USB Bidirectional printer dev 6 if 2 alt 0 proto 2 vid 0x04A9 pid 0x1766
αν και ισως εχει και αλλα στην αρχη αλλα δεν τα εμφανιζει. Μπορειτε να καταλαβετε κατι απο αυτο?
- dglent
- Δημοσιεύσεις: 1069
- Εγγραφή: Τετ Ιουν 01, 2011 05:42 am
- Τοποθεσία: Γαλλία
- Has thanked: 6 φορές
Re: Mageia 4 alpha 3 + canon pixma MX395
Φαίνεται ότι αναγνωρίζεται χωρίς σφάλματα.9604.106231] usb 3-3: new high-speed USB device number 6 using xhci_hcd
[ 9604.119499] usb 3-3: New USB device found, idVendor=04a9, idProduct=1766
[ 9604.119506] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 9604.119511] usb 3-3: Product: MX390 series
[ 9604.119514] usb 3-3: Manufacturer: Canon
[ 9604.119517] usb 3-3: SerialNumber: 916CC2
[ 9604.123371] usblp 3-3:1.1: usblp0: USB Bidirectional printer dev 6 if 1 alt 0 proto 2 vid 0x04A9 pid 0x1766
[ 9604.124865] usblp 3-3:1.2: usblp1: USB Bidirectional printer dev 6 if 2 alt 0 proto 2 vid 0x04A9 pid 0x1766
Το ότι δεν μπορείς να κάνεις δεξί κλικ στον εκτυπωτή είναι πρόβλημα. Δεν ξέρω αν φταίει το ότι είναι alpha, λογικά όχι, δες όμως αν υπάρχει κάποια αναφορά σφάλματος για την cauldron ή στο errata (https://wiki.mageia.org/en/Mageia_4_Errata)
Επίσης από το κέντρο ελέγχου » εκτυπωτές, μπορείς να κάνεις αποσφαλμάτωση του εκτυπωτή με F1, ή βοήθεια » αντιμετώπιση προβλημάτων. Μήπως και βγάλει κάποιο μήνυμα που να λέει τι δεν του αρέσει...
![Problem :problem:](./images/smilies/icon_problem.gif)
- dglent
- Δημοσιεύσεις: 1069
- Εγγραφή: Τετ Ιουν 01, 2011 05:42 am
- Τοποθεσία: Γαλλία
- Has thanked: 6 φορές
Re: Mageia 4 alpha 3 + canon pixma MX395
Also be sure that you have the latest updates of your Cauldron:
urpmi --auto-update
urpmi --auto-update